Like all good 1911s, this was an incredibly shootable handgun. The sights were excellent highly-visible and not prone to snagging on clothing or slicing skin. The trigger measured consistently at just under 5 pounds with only the slightest hint of creep. Combined with the stainless steel construction, dual springs and 9mm chambering, it was extremely controllable and pleasant to shoot. The high undercut below the triggerguard on the Combat Elite Government allows for a high grip on the gun. This feature appears on both the 9mm and. The only real twist is a dual recoil spring arrangement that reduces felt recoil and extends spring life. The extractor is internal, and the ejector is fixed. The 5-inch National Match barrel uses two locking upper lugs and is not integrally ramped, instead relying on the original feeding arrangement that combines a ramped frame and a generous radius at the rear of the chamber. Though I’ve seen many 1911s deviate from some of the traditional design elements, the Combat Elite Government is built the way Browning intended it. I wouldn’t hesitate to carry it as a primary handgun, but it would also make for a great practice pistol before wearing a full-size 1911 in. Although many probably aren’t looking for an all-steel, full-size, single-stack 9mm for everyday carry, the Combat Elite is nonetheless well-equipped for the job. 38 Super in the 1930s, and 9mm 1911s have been extant since 1949. 45 ACP, remember that Colt introduced the. However, before you reject the notion of a 1911 not chambered for. Nine-millimeter 1911s have become quite popular in recent years due to their lighter recoil and less-expensive ammunition. (Mark Fingar photo)Ĭombat Elite Government This is a full-size Model 1911 with a 5-inch barrel. Though Series 80 pistols are often maligned for their creepy triggers due to the safety levers and plunger, I don’t feel there is much of a practical difference on Colt’s stock guns. Series 80 guns also use a firing-pin block in the slide as an additional safety measure if the gun were dropped. The hammer comes to rest a fraction of an inch from the firing-pin stop and, when the trigger is pulled a second time, the hammer falls to rest. The trigger is pulled and then released while the hammer is lowered manually. The first is a half-cock notch that allows the user to lower the hammer without firing the pistol inadvertently. There are two main elements of the Series 80 guns relevant to shooters. All three come with black G-10 grips that are half-textured and scalloped to create a thumbrest on the left panel.Ĭolt incorporated the Series 80 safety mechanism, which has appeared in most of Colt’s 1911s since the early 1980s.Ĭolt incorporated the Series 80 safety mechanism, which has appeared in most of Colt’s 1911s since the early 1980s. Colt Combat Elite Government (Mark Fingar photo)Īll of the Combat Elite models wear angled rear cocking serrations, which were first seen on National Match guns in the 1960s. The internal working surfaces of the guns remain coated, which is a good thing. Once finished, the flats of the frame, slide and hammer are sanded, which reveals the stainless steel grains underneath and creates a two-tone look. Unlike other finishes on the market, Ionbond is also incredibly thin, so it is suited for guns built with tight clearances. Ionbond is a Physical Vapor Deposition (PVD) coating that is regarded for its wear and friction resistance. Each model is built from stainless steel and then finished in a matte-black Ionbond. Aesthetically, all three guns in the Combat Elite series are constructed with the same basic design elements.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |